Call(407) 460-8788

Advanced Surface Systems · Orlando, FL

Epoxy Garage Floor Coatings in Orlando

A garage floor is only as good as the prep underneath it. We mechanically grind and clean your concrete, then install a coating system chosen for your slab and the way you use your garage — flake, solid color, polyaspartic or a custom finish.

Essential garage systems from $5/sq ft.

Call (407) 460-8788 See pricing & estimate your garage

Call for a project estimate

One-Day Installation

*Project timelines may vary depending on the coating system, project size, slab condition, repairs, moisture conditions and required surface preparation.

*Most areas up to about 500–600 sq ft are installed in one day; metallic systems take about 3 days.

Finished gray and gold metallic epoxy garage floor with a high-gloss marbled finish and a kayak stored overhead
  • Insured
  • 4+ years of hands-on experience
  • 200+ completed projects
  • Written warranty

Experience and project count refer to the coating professional who leads Gatto Services.

Recent projects

Garage floors we have finished

Each card is one project. Swipe or use the arrows to see its photos; select a photo to enlarge it.

1 / 20

Blue Metallic Epoxy Garage Floor

Serving Central Florida

20 photos · 5 videos · Completed

Walk-through of the finished blue metallic epoxy garageVideo · 0:05

4 more videos on the project page

View this project

View all projects

A resin coating system made for your garage slab

A garage floor coating is a multi-layer resin system installed over properly prepared concrete. Depending on the system, it combines a base coat, decorative flakes or color, and a top coat. The result is a cleaner, more durable and easier-to-maintain garage floor than bare concrete.

It's a fit for Orlando-area homeowners who park in the garage every day, use it as a workshop, or simply want a finished space instead of stained, dusty concrete. The right system depends on your slab, how the space is used and the look you want — that's what we sort out with you on the phone and before we quote.

Typical garages we plan for: one-, two- or three-car layouts; a home gym, a crafting table or a tucked-away office nook; bikes, shelving, a golf cart, a spare fridge or chest freezer, mowers, kayaks, surfboards, fishing rods, a boat on its trailer and holiday decorations along the walls; and the occasional collector's showroom.

Garage floor systems we install

Epoxy or polyaspartic? We install both, so the recommendation starts with your slab and how you use the space, not with the one product we sell.

Close-up of a finished epoxy flake floor with a gray, white and black chip blend Full FlakeDecorative flakes broadcast across the entire floor, so the base color doesn't show. Leaves a textured surface that is more slip-resistant than a smooth finish. A popular choice for everyday garages.Flake floor coatings Corner of a finished flake floor with polyaspartic top coat against white walls PolyasparticA coating chemistry we install as an alternative to epoxy. How it fits your garage depends on the slab, how you use the space and the system. It is also the top coat we finish our flake, solid color and quartz floors with.Polyaspartic coatings Black and orange metallic epoxy with flowing swirls, high gloss Metallic & MarbleA high-gloss, one-of-a-kind finish with movement and depth — even matched to your car's color. Takes longer to install than our standard garage systems.Metallic & marble floors
Partial FlakeA lighter flake broadcast over a colored base — a budget-friendly way to finish a garage.Partial flake garages from $900Partial flake option Solid Color EpoxyA uniform color coat — gray, black, white or a custom color. Clean and simple.Solid color epoxy QuartzBroadcast quartz over resin for a textured, durable finish.Quartz systems

Planning a showpiece garage for a collection? See Luxury & Custom Garage Floors

Already have a coating that's peeling or failing? See Floor Coating Repair & Resurfacing

How we install your garage floor

Surface preparation is the hardest and slowest part of the job — and it's what decides whether a coating holds. We don't skip steps.

  1. Evaluate the slab. We look at the condition of your concrete and how you use the garage before recommending a system, with moisture testing when needed.
  2. Mechanically grind the concrete. A floor grinder opens up the surface so the coating can bond.
  3. Remove all the dust. We vacuum the entire area, then go over it with a blower so no dust is left behind.
  4. Wipe it down — no water. The slab is cleaned with alcohol, never water. If a hand run across the floor picks up dust, it isn't ready yet.
  5. Apply the base coat. The two-part resin is mixed on site and applied.
  6. Broadcast flakes (flake systems only) — partial or full coverage.
  7. Scrape, vacuum and blow again. Excess flake is scraped off and the floor is cleaned a second time.
  8. Apply the top coat. A polyaspartic top coat on flake, solid color and quartz floors; metallic floors get a dedicated finish coat of their own.
  9. Clean up. We bag and haul away the job debris and leave the space clean — nothing left for you to do.

Before we arrive: please clear the garage of vehicles and belongings. The floor needs to be completely empty for us to work.

Garage slab mechanically ground and cleaned, ready for the flake systemEnlarge photo 1 of 1
Mechanical grinding
Epoxy base coat freshly rolled on a garage floor, edges masked with blue tape, before the flakesEnlarge photo 1 of 1
Base coat, before the flakes
Finished flake floor with polyaspartic top coat across a wide bay with white wallsEnlarge photo 1 of 1
Finished floor

One-Day Installation* — and when you can use your garage again

One-Day Installation

*Project timelines may vary depending on the coating system, project size, slab condition, repairs, moisture conditions and required surface preparation.

*Most areas up to about 500–600 sq ft are installed in one day; metallic systems take about 3 days.

Most of our garage installations are completed in a single day. Installation day, though, isn't move-in day. Plan the days after it like this:

  • First 72 hours: no foot traffic unless we authorize it.
  • After 72 hours: light foot traffic.
  • After 5 days: vehicles and heavy loads.
  • After 7 days: full cure.

Following this schedule protects your floor and your warranty. We'll confirm the dates for your project when we quote.

Published pricing

Garage systems run $5–7/sq ft (Essential), $7–10/sq ft (Signature) and $10–15+/sq ft (Black Label custom designs). Project minimum: $900.

What changes your price: slab condition, repairs, moisture, the surface preparation required, project size, the finish you choose and design complexity.

See full pricing & estimate calculator Call for your exact estimate

Backed by a written warranty

Every installation is backed by a written warranty covering delamination, loss of adhesion and installation-related failures, when the floor is used and maintained according to our use and care guidelines. Full warranty terms come with your estimate.

Why Orlando homeowners call Gatto Services

  • Insured. General liability coverage.
  • Experienced hands on your floor. Led by a coating professional with 4+ years of hands-on experience and 200+ completed projects.
  • Prep you can see. Every floor is mechanically ground, fully vacuumed and cleaned dust-free before any coating goes down.
  • Published pricing. Know the range before you call.
  • A clean finish. We haul away the job debris and leave the space clean.

Serving Orlando and nearby communities

We install garage floor coatings across the Orlando area, including Kissimmee, Winter Garden, Windermere, Winter Park, Apopka, Lake Mary, Sanford and Clermont, with projects available across Central Florida and Tampa Bay. As a service-area business, we come to your property — call to confirm service at your address.

See all service areas

Garage floor coating FAQ

Most of our garage installations are completed in one day. Metallic floors take longer. Remember that installation day isn't move-in day — see the schedule above.

One-Day Installation

*Project timelines may vary depending on the coating system, project size, slab condition, repairs, moisture conditions and required surface preparation.

*Most areas up to about 500–600 sq ft are installed in one day; metallic systems take about 3 days.

No foot traffic for the first 72 hours unless we authorize it; light foot traffic after that. Vehicles and heavy loads after 5 days. Full cure takes 7 days.

With full flake, decorative flakes cover the entire floor so the base color doesn't show, and the surface is more slip-resistant. With a partial flake broadcast, the base color shows through and the texture is lighter. They're different systems with different prices.

Usually both: an epoxy base where the system calls for it, finished with a polyaspartic top coat. Which system goes on top of that depends on your slab, how you use the garage and the finish you want. See our polyaspartic page, or call and we'll talk it through.

Full flake and quartz systems leave a textured surface that is more slip-resistant than a smooth finish.

Under our written warranty, normal heat generated by vehicles and tires during regular use does not affect coverage.

When needed. Most slabs don't call for it, so we test when the condition of the concrete suggests it.

Yes. The garage needs to be completely clear of vehicles and belongings before we start.

Yes. We bag and haul away the job debris and leave the space clean.

Sweep or vacuum regularly, clean with water and a pH-neutral cleaner, and wipe up oil, fuel or chemicals when you notice them. Avoid abrasive products, harsh solvents, steel wool and dragging heavy objects across the floor.

Yes — a written warranty covering delamination, loss of adhesion and installation-related failures, when the floor is used and maintained as instructed. Full terms come with your estimate.

Yes. Gatto Services carries general liability insurance.

Related services and guides

Ready for a better garage floor?

Call and tell us about your garage — size, condition and how you use it. We'll talk through the options and your exact estimate.

Call (407) 460-8788 or text us

Open daily, 6 AM – 9 PM

Call (407) 460-8788